Disposable — Coveralls
• Protective coverall CE Type 5 & 6
• 50gsm
• For fine dust particles
• Reduced spray and limited splash
• 2 way zip front with adhesive storm flap
• Elasticated cuffs, ankles, waist and hood
• Breathable fabric
• Ideal for hazardous waste removal
• Individually packaged
• Very economical
• Conforms to:
EN ISO 13688:2013+A1:2021
EN ISO 13982-1:2004+A1:2010 (Type 5)
EN 13034:2005+A1:2009 (Type 6)
EN 1073-2:2002 (Class 2)
EN 1149-5: 2018
EN 14325:2004
• Protective coverall CE Type 5 & 6
• For fine dust particles
• Reduced spray and limited splash
• 2 way zip front with adhesive storm flap
• Elasticated cuffs, ankles, waist and hood
• Breathable fabric
• Ideal for hazardous waste removal
• Individually packaged
• Very economical
• Conforms to:
EN ISO 13688:2013+A1:2021
EN ISO 13982-1:2004+A1:2010 (Type 5)
EN 13034:2005+A1:2009 (Type 6)
EN 1073-2:2002 (Class 2)
EN 1149-5: 2018
EN 14325:2004
• Protective coverall CE Type 5 & 6
• For fine dust particles, reduced spray and limited splash
• Anti static
• 2 way zip front with storm flap
• Elasticated cuffs, ankles, waist and hood
• Microporous breathable fabric
• Individually packaged
• Very economical
• Conforms to:
EN ISO 13688:2013+A1:2021
EN ISO 13982-1:2004+A1:2010 (Type 5B)
EN 13034:2005+A1:2009 (Type 6B)
EN 1073-2:2002 (Class 1)
EN 14126:2003+AC:2004
Resistance to Penetration by contaminated liquids under hydrostatic pressure = Class 6
Resistance to Penetration by infective agents due to mechanical contact with substances containing contaminated liquids = Class 6
Resistance to penetration by contaminated liquid aerosols = Class 3
Resistance to penetration by contaminated solid particles = Class 3
EN 1149-5: 2018
EN 14325:2004
Microporous type 3/4/5/6 disposable coverall
• 90gm 56% SMS polypropylene, 44% polyethylene
• Polyethylene laminated +3 layers of polypropylene
• Ultrasonic taped seams
• Elasticated hood, wrists, ankles and waist
• Zip front with storm flap
• Elasticated thumb loops
Ideal uses:
• Maintenance & Repair
• Powder coating
• Insulation laying
• Pharmaceutical manufacture
• Paint spraying
• Wood & Metal processing
• Low level chemical handling
• Resin application
• Pressure/Steam water cleaning
• Fibreglass manufacture
• Conforms to:
EN ISO 13688:2013+A1:2021
EN 14605:2005+A1:2009 (Type 3B & 4B)
EN ISO 13982-1:2004+A1:2010 (Type 5B)
EN 13034:2005+A1:2009 (Type 6B)
EN 1073-2:2002 (Class 2)
EN 14126:2003+AC:2004
Resistance to Penetration by contaminated liquids under hydrostatic pressure = Class 6
Resistance to Penetration by infective agents due to mechanical contact with substances containing contaminated liquids = Class 6
Resistance to penetration by contaminated liquid aerosols = Class 3
Resistance to penetration by contaminated solid particles = Class 3
EN 1149-5: 2018
EN 14325:2004
Protects against:
• Chemical & Viral agents (including Coronavirus)
• Bloodborne pathogens
• Sulphuric acid
• Contaminated liquids
• Radioactive Contamination
• For fine dust particles, reduced spray and limited splash
• Anti-static
• 2 way zip front with storm flap
• Elasticated cuffs, ankles, waist and hood
• Microporous fabric 54% polypropylene + 46% polyethylene
• Individually packaged
EN 13034: 2005 + A1: 2009
EN13982-1: 2005 + A1: 2010
EN 1149-5: 2018 Anti-Static – Material Performance and Design Requirements
EN 1073-2: 2002 Protective Clothing against radioactive contamination (no rays)
EN 14126: 2003 + AC:2004 Protective clothing against Infective agents (Type 5B, 6B)
• Fabric disposable boilersuit
• Non woven fabric
• 33gsm SMS (spunbond + meltblown + spunbond nonwovens)
• Elasticated hood
• Elasticated waistband and ankles
• No.3 nylon spiral one-way zip front opening
• Zip colour matches garment shell fabric.
• Fabric disposable boilersuit
• Non woven fabric
• 33gsm SMS (spunbond + meltblown + spunbond nonwovens)
• Elasticated hood
• Elasticated waistband and ankles
• No.3 nylon spiral one-way zip front opening
• Zip colour matches garment shell fabric.
• Non woven polypropylene
• Disposable visitors coat with collar
• Hook and loop fastening
• Certified according to Regulation (EU) 2016/425.
• Chemical protective clothing, Category III, Type 5-B and 6-B.
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)..
• EN ISO 20471 (High Visibility Clothing, Class 3), RIS-3279-TOM Issue 2
• X-crossed bands on the back to distinguish rearward and forward orientation of the wearer, as well as bands above the elbows, wrists, knees, and
ankles for added protection
• Antistatic treatment (EN 1149-5) - on inside
• Stitched external seams.
• Very low inward leakage thanks to optimised design.
• Auto-lock zipper made with Tyvek® material and Tyvek® flap for increased protection
• All-in-one solution: high-visibility (to the highest class), chemical, biological and antistatic protections in one coverall
• Hood designed to fit a respirator
• Durability & breathability of Tyvek® non-woven fabric
• Ideal for use in dangerous environments involving exposure to water-based liquids and aerosols, as well as fine particles and fibers, this garment is
designed to help protect in darkness or poor weather conditions
• Chemical protective clothing, Category III, Type 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)..
• Antistatic treatment (EN 1149-5) – on both sides of the fabric
• Innovative, patent-pending design for applications where full-body harness is worn; garment is designed to be worn over the full-body harness
• Multiple access points to the full-body harness through the four elasticized D-Ring sleeves that are attached to the garment - one in the front, one in
the back, and one on each side of the garment
• Off-centered zipper entry to accommodate the front D-Ring sleeve for front D-Ring connection
• 3-piece hood with elastic face opening
• Stitched seams
• Tyvek® thumb loops
• Tyvek® zipper and Tyvek® storm flap
• Elasticated ankles & wrists and elasticated (glued-in) waist
• Ample crotch area
• Silicone non-added
• Dynamic Fall Test with an articulated mannequin - Tested in an independent testing laboratory as well as at a harness manufacturer with a conclusion
that the Tyvek® 500 HP TY178S HP garment does not affect the dynamic fall test performance of the full-body harness when worn underneath this
garment. The test is successful as it demonstrated that the Tyvek® 500 HP TY178S HP garment is not impairing the proper function of the full-body
harness in case of a fall.
The 4520 is made from extremely lightweight and breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes.
• Elasticated hood, ankles and waist.
• 2 way zip with sealable tab on storm flap.
• 3- panel hood.
• Knitted cuffs.
• Low linting.
The 3M 4530 is designed to be lightweight and breathable whilst offering protection against hazardous dusts and limited liquid splashes. The material complies with ISO 14116:2008 for limited flame spread index 1 (must be worn over an index 2 or 3 garment).
Type 5/6
Elasticated hood, ankles and waist
2 way zip with fully sealable storm flap 3-panel hood Knitted cuffs Low linting
• Highly breathable, antistatic suit used stripping, clear up or handling of asbestos, general maintenance, construction and contract cleaning
• 3-piece hood
• Elasticated hood, wrists, waist and ankles
• 2-way front zipper with re-sealable storm flap
• Finger loops
• Anti-static treatment
• Conforms to Type 5, 6, EN1073-2 and EN1149-5
• Provides both protection and comfort with exceptional liquid and particle protection
• 3-piece hood
• Elasticated hood, wrists, waist and ankles
• 2-way front zipper with resealable storm flap
• Finger loops
• Conforms to Type 5, 6, EN14126, EN1073-2 and EN1149-5
• White, Hooded coverall
• Type 5/6
• Stitched internal seams
• Elasticated wrists, ankles, and face
• Elasticated waist (glued-in)
• Zipper flap
CAT III
EN ISO 13982-1:2004 + A1:2010
EN 13034:2005 + A1:2009
EN 1073-2:2002
EN 1149-5:2018 (on inside)
• White, hooded coverall 3 piece hood.
• Elasticated face, wrist and ankles.
• Protection against particles and liquid splash.
• Must be worn over the top of a primary FR garment.
• Stitched external orange seams.
• Suitable for petrochemical, railway, welding and many other applications.
• Conforms to: CAT III, Type 5,6. EN 1073-2, EN 1149-5, EN 14116 Index 1
EN13688 - general performance requirements for ergonomics.
EN13982 - Type 5 test
EN13034 -Type 6 test
EN14325 - CE marking - protective clothing
• Tyvek® 500 HV
• Flourescent Orange, collared coverall
• Robust, yet lightweight
• HV reflective bands
• Elasticated waist, wrists and ankles
• Excellent barrier to fine particles and fibres
• High Visibility that doesn't wash out
• Suitable for working in rail, mining,road, underground, waste, ports , airports and many other applications.
• Conforms to: CAT III, Type 5B, 6B. EN1073-2, EN1149-5 (inside), EN14126, EN ISO 20471 class 3/3
• Pictograms: CAT III, Type 5B, 6B. EN1073-2, EN1149-5 (inside), EN14126, EN ISO 20471 class 3/3
• RIS-3279-TOM Issue 1
• White, hooded coverall
• Attached socks and boot flaps
• Stitched and over taped seams
• Thumb loops
• Tunnelled elastication at wrists, ankles, and face
• Elasticated waist (glued-in)
• Tyvek zipper
• Self-adhesive zipper and chin flap
CAT III Type 4-B, 5-B, 6-B
EN 1073-2:2002
EN 14605:2005 + A1:2009
EN ISO 13982-1:2004 + A1:2010
EN 13034:2005 + A1:2009
EN 14126:2003
EN 1149-5:2008
Tyvek ® 800J
• White, hooded coverall
• Robust, yet lightweight
• Adhesive Chin Flap
• Elasticated face, wrist and ankles
• Thumb Loops
• Self-Adhesive Zipper Flap
• Stitched and over taped seams
• Effective Barrier for low concentrated water based inorganic chemicals and hazardous particulates
• Oil repellancy
• Suitable for industrial cleaning, petrochemical, sewers and maintenance and many other applications.
• Conforms to: CAT III, Type 3B, 4B, 5B, 6B. EN 1073-2, EN 1149-5, EN14126
• Pictograms: CAT III, Type 3B, 4B, 5B, 6B. EN 1073-2, EN 1149-5, EN14126
• Hooded coverall.
• Robust, yet lightweight.
• 3 piece hood.
• Elasticated face, wrist and ankles.
• Excellent barrier to fine particles and fibres.
• Ultra-low linting.
• Stitched external seams.
• Suitable for pharmaceutical, chemical processing, oil and gas industry, maintenance spray painting and many other applications.
• Conforms to: CAT III, TYPE 5B, 6B. EN 1073-2, EN 1149-5, EN14126
Tyvek ® Classic Plus
• White, hooded coverall
• Robust, yet lightweight
• Adhesive Chin Flap
• Elasticated face, wrist and ankles
• Thumb Loops
• Excellent barrier to fine particles and fibres
• Stitched and over taped seams
• Ultra-Low Linting
• Suitable for Pharmaceutical manufacturing, nuclear, laboratory, biohazards and many other applications.
• Conforms to: CAT III, Type 4B, 5B, 6B. EN 1073-2, EN 1149-5, EN14126
• Pictograms: CAT III, Type 4B, 5B, 6B. EN 1073-2, EN 1149-5, EN14126
• EN 14605:2005 + A1:2009
• EN ISO 13982-1:2004 +A1:2010
• EN 13034:2005 + A1:2009
Tyvek® 500 Xpert
• White, Hooded coverall
• Ergonomic-protective design
• Stitched external seams
• Elasticated wrists, ankles and face
• Elasticated waist (glued-in)
• Tyvek® zipper and flap
• Conforms to: CAT III, TYPE 5B, 6B. EN 1073-2, EN14126, EN 1149-5 (on both sides)
• Hooded coverall
• Lightweight and durable (<700g)
• Adhesive chin flap
• Elasticated face, wrist and ankles
• Thumb loops
• Double cuffs, zippers and zip flaps
• Stitched and over seams
• Good barrier against organic and inorganic chemicals
• Suitable for oil and gas industry, chemical engineering, response teams and many other applications
• Conforms to: CAT III, Type 3B, 4B, 5B, 6B, EN 1073-2, EN 1149-5, EN14126
DuPont Tychem® C, model CHA5. Hooded coverall.
Available in bright yellow for high visibility.
• Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up.
• Self-adhesive chin flap for tight seal of suit to face-masks.
• Made from a lightweight and durable fabric (<450g per garment).
Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).
Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.
Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
Antistatic treatment (EN 1149-5) - on inside
Stitched and over-taped seams with barrier tape for protection and strength.
Self-adhesive double zipper flap closure system for higher protection.
